Sunix USB2311C USB3.1 Enhanced SuperSpeed Single port PCI Express Host Card with USB-C

Hardware

• BUS: PCI Express Spec 3.0, Single-Lane (x1)
• Controller: PCI Express USB3.1 Host controller, Asmedia ASM1142
• USB Standard: eXtensible Host Controller Interface (xHCI) Rev1.1
• IRQ & IO: Assigned by System

USB Communication

• Interface: Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1
• Speed:
  • Super Speed+ (10Gpbs)
  • Super Speed (5Gpbs)
  • High Speed (480Mbps)
  • Full Speed (12Mbps)
  • Low Speed (1.5Mbps)
• No. of Port: 1-port
• PCB Connector: USB3.1 USB Type-C port (Downstream Facing Port)
• Protection:
  • ±15KV IEC61000-4-2 Air Gap Discharge
  • ±8KV IEC61000-4-2 Contact Discharge

Power

• Source: +5VDC / SATA Power Connector Type
• Output Capacity: USB Type-C Port: +5VDC / Maximum 3.0A / each port

Note: Total power output capacity will be limited by system power supply.

• Over Current Protection: ?USB Type-C Port: +5VDC / Maximum 3.7A / each port
• Power Consumption: 1.1 W @ 3.3V (board only without power output to USB device)

Driver Support

• Windows:
  • Windows 7 (X86/X64)
  • Windows 8.x / 10 (X86/X64) (Windows in-box driver)
• Linux: Linux 2.6.31 or later (Linux OS already implemented USB3.0 driver)

Environment

• Operation Temperature: 0 to 60°C (32 to 140°F)
• Operation Humidity: 5 to 95% RH
• Storage Temperature: -20 to 70°C (-4 to 158°F)

Regulatory Approvals

• EMC:
  • EUR: CE, EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3
  • US: FCC Part 15 Class B
  • TAIWAN: BSMI: CNS13438
  • AS/NZS: C-Tick: CISPR22
  • JAPAN: VCCI
• Green: RoHS, CRoHS, WEEE

Physical Characteristics

• PCB Dimension: 65.7 x 68.5 mm
• Bracket: Standard 120 mm (Low Profile 80mm)
• Bracket Space: 1