Sunix MIO6479A PCI-E Expansion Card
Sunix MIO6479A PCI-E Expansion Card
Description
Sunix MIO6479A 2-port RS-232 Serial & 1-port Parallel PCI Express Multi-I/O Board
Introduction
The majority of today’s motherboards are not equipped with any RS-232 or Parallel port. With SUNIX MIO6479A Multi I/O board, users can expand two RS-232 COM and one IEEE1284 LPT ports to their system, allowing them to use serial and parallel devices further. This board is compatible with PCI Express x1, x2, x4, x8 and x16 lane, allowing the board to be installed in virtually any PC system. SUNIX MIO6479A built-in SUNIX high performance and realizable native PCI Express controller, and as well built with many of SUNIX advanced features and technologies, making it the advanced and high efficient solution for commercial and industrial automation application.
Features
- Expands 2-port RS-232 COM and 1-port IEEE1284 LPT on system.
- With high reliable SUNIX SUN2410 native PCI Express 16C950 UART and IEEE1284 controller.
- Designed to meet PCI Express Base Specification Revision 2.0.
- Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus connector keys.
- On-chip hardware auto flow control to guarantee no data loss.
- Built-in ± 15KV ESD protection for all serial signals meets IEC1000-4-2 standard.
- Support IEEE 1284-1994 parallel port standard.
* ECP(Enhance Capacity Port) / EPP(Enhance Parallel Port).
* SPP (Standard Parallel Port) / BPP (Bi-direction Parallel Port). - Plug-n-Play, I/O address and IRQ assigned by system.
- Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
- Support Microsoft Windows, Linux, and DOS.
DESCRIPTION
Product Description | 2-port RS-232 & 1-port Parallel PCI Express Multi-I/O Board |
GENERAL |
|
Interface | RS-232 and IEEE1284 |
Controller | SUNIX SUN2410 (16C950 UART Compatible) |
Bus | PCI Express Spec 2.0, Single-Lane (x1) |
IRQ & IO | Assigned by System |
SERIAL COMMUNICATION |
|
Interface | RS-232 |
No. of Port | 2-port |
FIFO | 128 byte (Hardware) |
Signal | DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI |
Baud rate | 50 bps to 115.2 Kbps |
Data bit | 5,6,7,8 |
Stop bit | 1,1.5,2 |
Parity | None, Even, Odd, Space, Mark |
Flow Control | None, Xon/Xoff, RTS/CTS |
Protection | ±15KV ESD protection for each signal Human Body Model (HBM) ±15KV IEC1000-4-2 Air Gap Discharge ±8KV IEC1000-4-2 Contact Discharge |
PCB connector | DB9 Male |
PARALLEL COMMUNICATION |
|
Interface | IEEE1284 |
No. of Port | 1-port |
FIFO | 16 byte (Hardware) |
Signal | SPP/ECP/EPP/BPP |
Speed | Maximum 1.8MBps |
PCB connector | 13x2 Pin Header |
Cable Connector | DB25 Female |
DRIVER SUPPORT |
|
Microsoft Client | Windows XP/Vista/7 (X86/X64) |
Microsoft Server | Windows 2000/2003/2008 (X86/X64) |
Microsoft Embedded | Windows XP Embedded/POS Ready 2009/Embedded System 2009/Embedded Standard 7 |
Linux | Linux 2.4.x / 2.6.x / 3.x |
DOS | DOS |
REGULATORY APPROVALS |
|
Hardware | EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, FCC Part 15 Class B, BSMI: CNS13438, C-Tick: CISPR22 AS/NZS, RoHS |
Software | Microsoft WHQL Windows Microsoft Client: XP/Vista/7 (X86/X64) Microsoft Server: 2000/2003/2008 (X86/X64) |
ENVIRONMENT |
|
Operation Temperature | 0 to 60°C (32 to 140°F) |
Operation Humidity | 5 to 95% RH |
Storage Temperature | -20 to 85°C (-4 to 185°F) |
DIMENSION |
|
PCB Dimension | 78 x 85 mm |
Bracket | Standard 121 mm |
Bracket Space | 1 |
Note: |